![Man using 3D printer](/sites/default/files/styles/fc_800x533/public/media/3d-printer-2000x1333.jpg.webp?h=56d0ca2e&itok=9onrb7w3)
The 3D Printing Community Is Stepping Up for Those on the Front Lines
We’ve enlisted the help of academic and industry partners to mass-produce the equipment. Companies large and small are taking part, including Universal Orlando Resort™, Cimquest, LulzBot® and Out of This World Embroidery.
AdventHealth Nicholson Center is a leader in surgical education, with a focus on robotic surgical devices and procedures. The prototype lab allows physicians, researchers, engineers and other medical professionals to test and refine their ideas for medical-device innovation. And now you too can join the fight to keep health care workers safe on the front lines of the pandemic.
![Face Shield Visor Front Plate](/sites/default/files/styles/fc_800x800/public/media/faceshield-visor-front-plate_0.jpg.webp?h=a7e6d17b&itok=wPr7w5MG)
Face Shield Headband and Bottom Reinforcement
Widely used Prusa RC3/RC2 model (with 4 hole design)
- Preferred material: PET-G
- Acceptable materials: PLA and ABS
![Face Shield Drawing](/sites/default/files/styles/fc_800x800/public/media/faceshield-drawing.jpg.webp?h=a7e6d17b&itok=h9knVa2W)
Face Shield Visor/Front Plate
Clear Portion to fit the Prusa RC3/RC2 (4 hole design)
- There is a DXF drawing in the File section (and an alternative longer version)
- The holes can be made with a standard office hole puncher
- Preferred material: 0.5 mm thick petg sheet (Covestro VIVAK),
- Acceptable material: Any clear laser cuttable plastic with similar thickness
Additional Information
Please take the following precautions when printing:
- Please do not create PPE if anyone in your home is sick or has been in the last 14 days
- Please wash hands immediately before and after
Donations will be accepted between 9am and 4pm at the following location:
- AdventHealth Nicholson Center: 404 Celebration Place, Celebration, FL 34747
- We are also willing to arrange pick-up
To register as part of this program, please email Scott Bond at [email protected] with the following information:
- Target number of items by date
- Type of 3d printer (possibly multiple)
- Type of filament used (size and material)
- Is this an individual or group?